Table of Contents
Advertisement
Preparation
Professional Installation Recommended
NOTE:
The following section is designed for the professional installer. We strongly recommend that a
certified dealer install the lift and instruct the user on correct operation as well as establish a safety and
maintenance schedule.
If you do not understand any portion of installation or operation, please consult our technical service
department or authorized mobility dealer. Do not attempt to install or use this lift with any hesitation or
question. Serious injury or damage can result if proper procedures are not followed.
Read & Understand this Manual Prior to Installation or Operation.
Having an overall understanding of the lift and proper installation techniques will help you save time, energy,
and avoid possible injury.
Tools Required
Installations may vary to some degree, but below are the basic tools to have on hand
for an Outside Lift installation.
SOCKET SET
Speci cally
15/16"
3/4"
9/16'
7/16"
#0,#2 FLAT HEAD
SCREWDRIVER
10
SECTION 2 : INSTALLER
ALLEN WRENCH
WRENCH SET
Speci cally
Speci cally
15/16"
3/4"
9/16"
7/16"
#2 PHILLIPS HEAD
SCREWDRIVER
| www.harmar.com | 800-833-0478
WIRE CUTTERS
1/8"
3/16"
5/16"
MARKING
TAPE MEASURE
IMPLEMENT
NEEDLE NOSE
PLIERS
ELECTRIC DRILL
w/ 3/8" Drill bit
Advertisement
Table of Contents
