4. Attach Strap Arm in the appropriate set of holes based on the amount of reach required.
Arm may be flipped or positioned farther back for
shorter reach. Straps should be reversed if flipped.
[Figure 23-2]
Never wrap strap over edge of strap keeper.
WARNING
TEC00037
2016FEB20
P/N: 630-00053 Rev A
SECTION 2 : INSTALLER
Figure 23-1
NOTE:
the top. If inserted from the bottom, the nut will
interfere with the activator.
AL815CC, AL825, AL825CC, AL835 Hybrid Installation & Owner's Manual 2017
Straps
Figure 23-2
Bolt must always be inserted through
[Figure 23-1]
23