Harmar Mobility AL815CC Installation & Owner's Manual page 21

3. The amount of allowable rotation
screw and rotate as required.
CAM
Set screw
4. Reversing Rotation:
If installing the lift on the passenger side, or the post rotates in the wrong direction,
simply reverse the wires at the rotational motor. [Figure 21-2] You may also need to flip the rotation cut-off
switches to properly stop the motor. [Figure21-3]
Figure 21-2
TEC00037 2016FEB20 P/N: 630-00053 Rev A
SECTION 2 : INSTALLER
is determined by the cams as indicated. [Figure 21-1]. Loosen set
CAM
Set screw
Rotation
cut o
switches
Figure 21-1
AL815CC, AL825, AL825CC, AL835 Hybrid Installation & Owner's Manual 2017
Installation
Figure 21-3
21