Table of Contents
Advertisement
Operating Your Lift
When the chair/scooter reaches the desired position,
lower the chair/scooter by pressing the 'DOWN'
button on the remote control. [Figure 8-1]
Stop lowering when about ¾ of the chair/scooter's
weight is on the floor. The best transportation
position for the chair/scooter will be with the lifting
arm holding the chair in position, as well as most of
the chair/scooter resting on the floor of the truck
bed. The lifting straps should remain taut. [Figure8-2]
To unload the chair, follow the steps in reverse, and
reverse the direction of the arrows.
Do NOT expose Remote Control to
rain or snow. If remote control is
plugged directly into the lift, remove
CAUTION
hand control after each use and store
it in the cab.
8
SECTION 1 : OWNER
| www.harmar.com | 800-833-0478
[Figure 8-1]
[Figure 8-2]
Advertisement
Table of Contents
