Figure 9: Viewing Active Network Connection - PLUSOPTIX A12C Short Manual

WLAN active
WLAN network
set-up
Note:
If you turn off the „plusoptiX A12C" or "plusoptiX A16" when a WLAN is connected,
it will automatically connect with the selected WLAN every time it is turned back
on.
To deactivate the WLAN interface, touch the button (1). You will automatically return to the
settings.
If the WLAN connection is disconnected, a yellow warning triangle with an error message will
be shown instead of the green checkmark (2).
This error message shows whether an incorrect password or no password at all
has been entered.
This error message shows that the DHCP server has not allocated the Plusoptix
device an IP address.
This error message shows that the WLAN router is outside the range of the
Plusoptix device, that there is no WLAN network set up or that the password for
the network has changed. In this case, enter the new password.

Figure 9: Viewing active network connection

1) 2)
Seite 9 von 9
IP address
and host name