Arming / Disarming The Tag Reader; Open Doors / Arm And Disarm (Entry Control) - Pyronix Enforcer 32-WE User Manual

F. Arming / Disarming the Tag Reader
If you have a tag reader installed, then it will be possible to arm and disarm the alarm system using a tag.
G. Open Doors / Arm and Disarm (Entry Control)
A tag reader can also be used to unlock entry doors.
External Tag Reader Instructions:
Arming: Present a valid tag to the reader, the GREEN LED will illuminate on the external reader, remove the tag, the door will unlock, then present the
same tag within 10 seconds and the system will arm and the door will lock.
Disarming: Present a valid tag to the reader and then remove it, the status will be shown (the alarm symbol will illuminate indicating that the system is
armed on the internal reader and the RED LED on the external reader). Present the same tag again within 10 seconds and the system will be disarmed,
and the door will unlock.
Access Control/Entry Control: The readers can be used also for opening doors only without the ability to arm and disarm. Please contact your installer
for more information on this feature.
Disarmed
NOTE: If the Enforcer has failed to set, a fault will be displayed on the internal tag
reader or a fail to set sound will activate on the external tag reader buzzer
Disarmed
NOTE: If the Enforcer has failed to set, a fault will be displayed on the internal tag
reader or a fail to set sound will activate on the external tag reader buzzer
Armed
Armed
Page: 9