Sms Commands - Pyronix Enforcer 32-WE User Manual

H. SMS Commands
If you have purchased the GPRS version of Enforcer, it will allow you to send SMS commands via a mobile phone, allowing you to arm/disarm the panel
remotely along with several other commands (see below the different SMS commands available).
NOTE: Any text message command to the Enforcer will need to start with a valid user code.
NOTE: Text messages commands are not case sensitive except when the used outputs are activated.
NOTE: If a text messages commands is not recognised by Enforcer it will send back to the user the wrong command.
Arming via SMS text command
Example SMS command send:
123456 Arm A
123456 Arm ABCD
NOTE: If no areas are specified then all areas will arm (default). In 'One Area' Mode, the default will be Area A.
Disarming via SMS text command
Example SMS command send:
123456 Disarm A
123456 Disarm ABCD
NOTE: If no areas are specified then all areas will disarm (default). In 'One Area' mode, the default will be Area A.
Arming with inputs bypassed via SMS text command
Example SMS command send:
123456 Arm A Bypass 4
123456 Arm A Bypass Kitchen
Bypassing inputs via SMS text command
Example SMS command send:
123456 Bypass 6
123456 Bypass Garage
NOTE: The name of the output has to be one word and spelled exactly as written in the panel (verbatim). For example, Garage Door is not
acceptable. It has to be written as Garage-Door in the panel and the respective command will be Garage-Door.
Description:
123456 = User Code. Arm A = Will arm the
Enforcer in Area A.
123456 = User Code. Arm ABCD = Will arm the
Enforcer in Area ABCD.
Description:
123456 = User Code. Disarm A = Will disarm
Area A.
123456 = User Code. Disarm ABCD = Will disarm
the Area ABCD.
Description:
123456 = User Code. Arm A Bypass 4 = Arms
Area A and will bypass input number 4.
123456 = User Code. Arm A Bypass Kitchen =
Arms Area A and will bypass the input that is
called Kitchen.
Description:
123456 = User Code. Bypass 6 = In the next
arming procedure, input number 6 will be
bypassed.
123456 = User Code. Bypass Garage = In the
next arming procedure, the input called Garage
will be bypassed.
Example SMS command response:
Final Arm; Area A
Final Arm; Area ABCD
Example SMS command response:
Disarm; Area A
Disarm; Area ABCD
Example SMS command response:
Input Bypass; Area A Input 04
Force Arm: Area A
Input Bypass; Area A Kitchen
Force Arm: Area A
Example SMS command response:
Input Bypass; Area A Input 06
Input Bypass; Area A Garage
Page: 10