Pyronix Cloud; Setting Up The Enforcer - Pyronix Enforcer 32-WE User Manual

I. Pyronix Cloud

Setting up the Enforcer

Check with your Engineer that the GPRS modem has been set up to enable communication between the control panel and the cloud/app.
Please refer to 'Master Manager Menu: Set Up App', on page 24 in order to view the programming stages to set up the app.
1) Enter the Master Manager menu and scroll to 'Set Up App', and press t.
2) Press 1 to 'Enable App' and press t.
3) Make a note of the System ID. Press t. (TO USE IN STEP 1 OF CLOUD SETUP ON P13)
4) Enter a secure password (max characters =16) for the Pyronix Cloud, Press t.
5) Press 0 to set Security to 'Standard'. Press t.
6) Enter a secure password for the Pyronix App. Press t.
7) 'Poll Server' will be displayed. Press t.
NOTE: When creating passwords, please ensure that the password uses a variety of upper case, lower case, numbers and symbols –
where applicable – to ensure the best security possible.
(TO USE IN STEP 1 OF CLOUD SETUP ON P13)
(TO USE IN STEP 3 OF APP SETUP ON PAGE 14)
Page: 12