Operating The Enforcer 32-We - Pyronix Enforcer 32-WE User Manual

B. Operating the Enforcer 32-WE
Default Master Manager Code: 1234
Arming/Disarming Methods:
How to navigate through the menus.
x
= "NO" - Press to move forward when in Engineer or Master Manger mode.
b
= "BACK" - Press to move backward when in Engineer or Master Manger mode
t
= "YES" - Press to enter in a submenu or option when in Engineer or Master Manger mode
]
= Press to move from one option into another option while in a submenu
a
= Press to quick exit the Engineer Menu from any main menu (written in capital letters)
c
= "CANCEL" - Press to move back from one programmable option to the previous option.
Main menus are indicated with capital letters and end with a question mark (?), for example: "LEARN WIRELESS DEVICE?". The sub-menus are
indicated with lower case letters and they also end with a question mark, for example "Control Inputs?". Programmable options are indicated with lower
case letters and do not finish with question mark (?) but Yes/No or other options are offered, for example: "Bypass PA/Fire". In order to navigate in the
menu system one has to answer to the questions in the main and sub-menus, for example: if the question is "LEARN WIRELESS DEVICE?", Pressing t
'YES' will bring you in the sub-menu "Control Inputs?". Pressing t (YES) will take you to the programmable options of this submenu. Pressing x "NO'
will take you out of the individual option, and will move you up from one sub-menu to the next sub-menu, or back to the main menu.
.
LEFT GREEN LED:
After a valid tag is presented, the GREEN
LED will illuminate indicating the power
status.
There are four different devices that may be used in the process of arming/disarming the alarm
system; these are the keypad, tag reader, keyfob and mobile (Android or iOS) device –using the app.
Button Operations
a = Exit engineer menu/Selects Area A
b = Moves backwards to the previous main menu item / Selects Area B
c = Displays additional information in the log / Scrolls to the previous option in a sub-menu / Selects area C.
d = Moves forward in the log / Selects Area D
f p = Used for Fire and PA Alarms
[ ] = Directional buttons (used for choosing options and moving through text)
t = Selects items and enters menu's.
x = Moves forward in the main menu and sub-menu / Exits option to sub-menu and sub-menu to main
menu.
Tag Area (Where you present your tag to arm/disarm)
Ready LED (Ready to arm)
Alarm LED (Shows alarms)
Tamper LED (Shows tamper alarms)
Alert/Pending (Fault) LED (Shows system faults)
Disarm LED (Shows system disarmed)
Page: 5