Lonworks Function Confirmation - Henny Penny LVE-202 Operation Manual

2-10. LONWORKS FUNCTION
CONFIRMATION
Oct. 2012
Once the installation of the Henny Penny fryer is complete,
perform this procedure to verify that the LonWorks control in the
LVE is communicating with the computer console in the store.
1. Access the LonWorks system on the store's computer console.
2. Turn the Main Power switch to the ON position on the Henny
Penny LVE fryer.
3. On one of the fryer controls, press both
and "1. E-LOG" shows in the display.
4. Press button until "9. COMM" & "LONWORKS
show in the displays. (If "LONWORKS ---" shows in
display, the LonWorks control is not being acknowledged by
the main controls.)
5. Press button twice and "SRVC" & "PIN" show in the
displays. Press button under "SRVC".
6. From the store's console, click the WINK DEVICE button
and the displays on ALL LVE controls should flash, verifying
that the system is working properly.
If the the fryer and the store's computer console is not
communicating, please contact the Technical Support Department
at 1-800-417-8405, 1-937-456-8405, or
technicalservice@hennypenny.com.
2-7
Model LVE-202, 203, 204
buttons
ü
"