Emerson Rosemount 8800D Series Quick Start Manual page 40

Quick Start Guide
E3 Certification No. GYJ17.1404X
Ex ia / d IIC T6 Ga/Gb (Integral Transmitter)
Ex d [ia Ga] IIC T6 Gb (Remote Transmitter)
Ex ia IIC T6 Ga (Remote Sensor)
Ambient temperature range: -50 °C ≤ Ta ≤ +70 °C
Process temperature range: -202 °C to +427 °C
Power Supply: 42 Vdc Max 4-20 mA HART
Power Supply: 32 Vdc Max Fieldbus
U = 250V
m
Special conditions for safe use (X):
1. The maximum allowable length of the interconnecting cable
2. Suitable heat-resisting cables rated at least +80 °C shall be used
3. Dimensions of flameproof joints are other than the relevant
4. The Flowmeter is provided with special fasteners of property
5. Any friction should be prevented in order to avoid the risk of
6. The earthing terminal should be connected to the ground
7. Do not open when energized.
8. The cable entry holes have to be connected by means of suitable
9. Users are forbidden to change the configuration to ensure the
10. Precautions shall be taken to ensure that the electronic parts are
11. During installation, operation and maintenance, users shall
40
between transmitter and sensor is 152 m. The cable shall also be
provided by Rosemount Inc., or by Emerson Process
Management Flow Technologies Co., Ltd.
when the temperature around the cable entry exceeds +60 °C.
minimum or maximum specified in Table 3 of GB3836.2-2010.
Contact manufacturer for details.
class A2-70 or A4-70.
electrostatic charge on the enclosure due to non-conductive
paint.
reliably at site.
entry device or stopping plugs with type of protection of Ex d IIC
Gb the cable entry device and stopping plugs are approved in
accordance with GB3836.1-2010 and GB3836.2-2010, and
which are covered by a separate examination certificate, any
unused entry hole is to be fitted with type of protection of Ex d
IIC Gb flameproof stopping plug.
explosion protection performance of the equipment. Any faults
shall be settled with experts from the manufacturer.
within permissible ambient temperature considering the effect
of the allowed fluid temperature.
comply with the relevant requirements of the product
™
Rosemount 8800D Series Vortex Flowmeter
October 2018