Keyboard Lock Code - Lighting Controls Blue Box LT Series Installation, Operation & Maintenance Manual

THE BLUE BOX LT PROGRAMMING
To Adjust Daylight Savings Change-Over dates:
1 . Navigate to the Display Options screen: SETUP
MENU > SYSTEM SETUP > SYSTEM OPTIONS
> DAYLIGHT SET UP .
Daylight parameters
Daylight starts on:
2nd Sun of Mar.
Daylight ends on:
1st Sun of Nov
2 . TAB to each setting and SCROLL to select the
proper value . Note A strict date-time system is
not used .
The DTC will set the time forward one hour on
the start date and backward one hour on the
end date .
3 . EXIT when complete . All changes will be
automatically saved .

kEYBOARD LOCk CODE

If you are responsible for maintaining and programming
the lighting control system, you may wish to prevent
others from making changes in the clock interface .
To do this, you can set a keyboard lock code that is
required to make any changes to schedules, groups,
switch programming, etc .
To set up the keyboard lock code, navigate the
following menus:

KEYBOARD LOCK CODE

IS: 0000
Set Code '0000' to
disable or any other
code to enable Key Lock
permanently
Hit exit if not sure
and see Users manual.
SETUP MENU > SYSTEM SETUP MENU > SYSTEM
OPTIONS > KEYBOARD LOCK CODE .
You will be prompted to create a 4-digit keyboard
lock code . SCROLL UP or DOWN to change values
:
and TAB UP or DOWN to move between digits .
When the desired value has been entered, EXIT to
save the code and return to the previous menu .
Any user attempting to access the programming
interface will now be required to enter the code you
set in order to view or change settings .
To remove the keyboard lock code, navigate back to
the screen where the code was originally .
SETUP MENU > SYSTEM SETUP MENU > SYSTEM
OPTIONS > KEYBOARD LOCK CODE (set the
4-digit number to 0000 and EXIT) .
87