Thermo Scientific Dionex SRD-10 Installation Instructions Manual page 8

Suppressor regenerant detector
Table of Contents

Advertisement

Dionex SRD-10 Installation Instructions
3.1
Chromeleon 7: Pump Setup
Start the Instrument Configuration Program
1. Stop all batches, programs, and data acquisition events on the
2. If it is not already running, start the Instrument Controller Service.
3. Start the Instrument Configuration program. (Click Start > All
4. If necessary, click the plus sign beside the controller name to display
5. Expand the contents of the instrument that includes the pump to be
6. Right-click the pump to be updated and click Properties.
6
Chromeleon Controller that hosts the pump to be updated.
(Click Start > All Programs > Chromeleon 7 > Services Manager,
and then click Start Instrument Controller.)
The Chromeleon Services Manager status message should read
"Instrument Controller Service is running idle."
Programs > Chromeleon 7 > Instrument Configuration
Manager.)
the items underneath.
updated. (Click the plus sign next to the instrument.)
The Properties dialog box for the pump appears. In this example, the
pump is a Dionex ICS-3000 DP.
Doc. 065355-04 05/18

Advertisement

Table of Contents
loading

Table of Contents