Table of Contents
Advertisement
b. Insert the Dionex ICS-3000 Dual Pump/ICS-3000 Single Pump
c. Copy the pump firmware file from the CD to the \Bin directory of
3. Click Install Firmware again. When the notification of the installed
firmware version appears, click Yes to update the firmware.
4. The download can take several seconds. When the download is
complete, remove the firmware CD from the drive. Store the CD in a
safe place, away from heat and moisture.
Configure the Pump TTLs
1. Click the Inputs tab in the pump Properties dialog box. Verify that
the correct TTL is selected.
For a Dionex ICS-3000 DP or ICS-5000 DP: If the Dionex SRD-10
is connected to Pump 1 and TTL 2, do not select the Pump_TTL_2
check box. If the Dionex SRD-10 is connected to Pump 2 and TTL 3,
do not select the Pump_TTL_3 check box.
Doc. 065355-04 05/18
Dionex SRD-10 Installation Instructions
Firmware CD into the appropriate drive.
your Chromeleon installation.
11
Advertisement
Table of Contents
