Table of Contents
Advertisement
2
Push down the pressure roller up/down lever.
Pressure roller up/down lever
3
Select "BASE" in the "SELECT PAPER" menu and press
the
SELECT PAPER
ROLL/SHEET: BASE
4
Input the paper width and press the
PAPER WIDTH
*1372 mm
5
Input the base point (print offset value for paper width
direction: origin point).
BASE POINT
*0000 mm
The previous setting value will be displayed.
key.
Paper Feed "FEED"
key.
The paper width detected at
previous time is displayed.
(Paper width input range: 290
to 1635 mm)
The base point set at previous
time is displayed.
2-33
Advertisement
Table of Contents
Troubleshooting
