Turning The Power On/Off - Seiko OC CS 6060 IP-6600 User Manual

Turning the Power On/Off

<Printer>
(1)
Power receptacle
<Heater>
Printer rear (Right side)
The power of the printer and the power of the heater are separated.
The printer has two power switches as follows.
(1) Printer switch
(2) Power ON/OFF switch
Printer rear (Left side)
The printer is turned ON by turning the printer switch ON.
Afterward, turn the printer ON/OFF by the ON/OFF switch on the
operation panel.
NOTE
- When the printer is connected with the computer, turn the
printer ON, and then turn the computer ON. To turn the
system OFF, turn the computer OFF, and then turn the
printer OFF.
- Turn the computer ON after the printer becomes to the
online state.
The heater has two power switches as follows.
(1) Heater switch
(2) 100/200 V alternation switch
(1)
(2)
Printer front (Operation panel)
(2)
For Heater
100-120V 12A 50/60Hz
Power receptacle
2-5