(Paper)
LIFT LEVER
SET PAPER
Description : Paper runs out.
: Set new paper.
Measure
=> Section 2 Basic Operations (Paper Replacement)
LIFT LEVER
CHECK PAPER
Description : Paper with an invalid size (less than 297 mm width or 64
: Set paper with a correct size.
Measure
=> Section 2 Basic Operations (Paper Replacement)
LIFT LEVER
SET PAPER
Description : Paper skews.
Measure
: Set paper correctly.
=> Section 2 Basic Operations (Paper Replacement)
SET PAPER
PUSH DOWN LEVER
Description : The lever is in the up-position.
Measure
: Set paper according to the message.
inch width or more) is set.
Ink may be attached to the platen according to skew
conditions. Wipe off ink on the platen.
When an Error Message Appears
5-9