Table of Contents
Advertisement
7
8
Push down the pressure roller up/down lever.
Pressure up/down lever
Perform operations according to the guidance message shown on the LCD.
9
2-14
When feeding a paper roll, hold it at the center and
rewind the flange to take up the slack in the paper.
The guide line on the printer is no more than a guide
line. Install paper roll on the printer in a straight line
against the paper roll.
The paper roll should not be inserted in the right of the perforated line.
If the paper roll is inserted in the right of the perforated line, adjust the
flange position.
Confirm the media edge guard setting again.
Confirm whether the media edge guard does not goes down of the
paper.
CHECK EDGE GUARD
*OK?
Confirm the position of the media edge guard and press the
key.
Advertisement
Table of Contents
Troubleshooting
