Table of Contents
Advertisement
(8) Edge guard setting (EDGE GUARD)
Set whether the media edge guard is used or not.
The right and left print margins will be changed by this setting.
#EDGE GUARD
>01 : USE
<Parameter (Enter a choice)>
-
USE
-
NOT USE : Set when the edge guard is not used.
(9) Paper feed mode setting (PAPER FEED MODE)
Set a paper feed mode.
#PAPER FEED MODE
>01 : SEQUENCE 1
<Parameter (Enter a choice)>
-
SEQUENCE 1
-
SEQUENCE 2
(10) Winder mode (WINDER MODE)
Set a paper winding mode.
#WINDER MODE
>01 : SLACK
<Parameter (Enter a choice)>
-
SLACK
-
TENSION : Drives the winder with the TENSION rewinding
: Set when the edge guard is used.
: Feeds the paper in the normal paper feed
sequence.
: Feeds the paper in the counter measure
sequence for paper with glue.
sticky/static paper [X-drive motor vibrates]
: Drives the winder with the SLACK rewinding
method.
method.
Menu Operations
3-21
Advertisement
Table of Contents
Troubleshooting
