When An Error Message Appears; Service Call Errors - Seiko OC CS 6060 IP-6600 User Manual

When an Error Message Appears

Service Call Errors

<POC error>
5-4
If the ERROR lamp lights, check the message to be displayed on
the LCD.
There are four types of error messages.
- Service call errors:
Operator unrecoverable errors, such as H/W, S/W failure.
Contact our service centers.
- Communication errors:
Communication protocol errors.
Take appropriate measures according to the error code or
message.
- Operator call errors:
The operator can correct these errors.
Take appropriate measures according to the message.
The error messages are as follows. Take appropriate measure
according to the error message.
If a communication error or a data error occurs, the ERROR
lamp does not light. An error message appears on the LCD
HINT
and disappears when the next operation is performed.
If any of the following service call error messages appears, turn
the power switch off and then on again. This may release the
HINT
error.
INITIALIZING
E E n n n n
Description: An unrecoverable error has occurred in the engine section.
(This error message appears when an error is detected
during self-diagnosis after the power is turned on.)
: Contact your dealer or our service centers (The error code
Measure
identified on the LCD is needed) .
nnnn: Error code