Using The Ad1 Track Adapter - ETC Source Four Mini LED User Manual

Using the AD1 track adapter

ETC offers the option of installing a track-mounted fixture with an adapter
that is compatible with Halo Track Systems. Halo Track Systems are not
available from ETC, but the Source Four Mini LED fixture can be custom-
ordered from ETC with the AD1 track adapter.
Both single and double circuit track can be accommodated with this adapter.
• For single circuit track, push the tab on the adapter to the lower
position.
• For double circuit track, push the tab to the upper position.
To install a fixture with the AD1 adapter:
1: Pull back on the retaining sleeve.
2: Insert the adapter into the track with the gold tabs parallel to the track.
3: Release the sleeve and rotate until you feel the adapter snap securely
into place.
Source Four Mini LED User Manual 7