Savaria OMEGA Installation Manual page 19

f. Be sure to check the tension of the rope around the
drive wheel at the top of the stairway.
g. When you achieve the right tension, clamp the rope
in the clamping system. Tighten the metal clamp
around the bottom of the white plastic parts,
remove the tensioning tool, and secure the rope
with a rope clamp as shown below. DO NOT cut off
the rest of the support rope.
Figure 47
Clamp rope in clamping system
4 Install the plastic tubing over the rest of the support
rope and turn it into a circle as shown below. Secure
with cable ties as required. Ensure it is fastened securely
so it won't interfere when the unit is running on the rail.
Figure 48
Plastic on rope
Part No. 000823, 06-m02-2012
5 Connect the carriage power wires to the rope and
sliding contact connections. Connect the black wire to
the rope clamp and the red wire to the sliding contact
between the rope levers in the tube as shown below.
The red wire assembly is for the tube (ground).
Figure 49
Connect wires to rope and slider
Page 19
Connect
RED wire
Connect
BLACK wire
OMEGA IPL Installation Guide