8 Troubleshooting
Personnel:
n
Qualified personnel
Among other factors, the spray pattern depends on the viscosity of the coating material. It can
be modified through the fluid pressure. If the optimal application cannot be achieved through
fluid pressure changes, it is recommended to try again with a different fluid nozzle.
If the fault is not included in the following tables or if it cannot be eliminated with the measures
described, contact Krautzberger Customer Care.
Error
Unsatisfying spray pattern
8.1
Customer Care
Krautzberger GmbH
Customer service
Stockbornstr. 13
65343 Eltville am Rhein
+49 6123 - 698151
customercare@krautzberger.com
GB–40
Operating instructions
Cause
Fluid nozzle possibly dirty
T-Dok-660-GB-Rev.1
Remedy
Clean fluid nozzle and replace
Ä Chapter 7.6
if necessary (
'Replace valve seat screw and
fluid nozzle' on page 38).
Insert a material filter in the
material supply line.
mail@krautzberger.com, www.krautzberger.com