Pre-Cooking Preparation; Start-Up; Cooking Oil; Food And Condiments - Broaster VF3iXP Installation & Operation Manual

START-UP

CAUTION: Check oil level before
pressing the ON button.
Exceeding the proper oil level may result
in excessive oil splatter, product floating out
of the basket, and increased grease laden
vapors through the air filter system.
An inadequate amount of oil will result in
exposed, uncooked product and possibly
expose the heating element causing exces-
sive smoke.
1. Push the ON button, the word POWER
should turn green. The HEAT ON light
will illuminate indicating the cooking oil
is being heated.
2. When the HEAT ON light goes off, the
oil has reached the set temperature.
3. Push the START button. This will per-
form a cook cycle to preheat the basket
to operating temperature.
4. When an audible alert sounds, push
the stop button.

COOKING OIL

The words "oil" and "shortening" are used to
describe a high quality liquid cooking
medium manufactured for deep frying.
CAUTION: Danger of fire exists if the
oil level is below the minimum level.
WARNING: Using old oil will reduce
flash-point and be more prone to
surge boiling.
WARNING: Use care when handling
hot oil. Oil could splash causing seri-
ous burns.

4 - PRE-COOKING PREPARATION

Manual #16887 5/08
Fill cooking well with Broaster
uid oils or a high quality liquid oil manufac-
tured for deep frying. Fill cooking well to
COLD OIL LEVEL as shown below.
Top of bar is HOT OIL LEVEL

FOOD AND CONDIMENTS

For detailed instructions refer to the Cooking
section of Chapter 8, PRODUCT PREPA-
RATION AND COOKING. Make sure the
food you purchase is high quality. For best
results, product should be uniform in size.
4 - 1
®
Bro-Oil
Bottom of bar is COLD OIL LEVEL
®
liq-