6 Set up with the display and adjustment module
Setup - AI FB1 Scaling
Setup - AI FB1 Scaling
unit
Setup - AI FB1 Damping
Setup - Lock adjustment
52
Additional scalings (Out-Scale) are carried out within the function
block. In this menu item, the unit of the scaling is entered.
Additional scalings (Out-Scale) are carried out within the function
block. In this menu item, the scaling unit is selected. For a better
overview, the units are combined in groups:
To damp process-dependent measured value fluctuations, set an
integration time of 0 ... 999 s in this menu item.
Depending on the sensor type, the factory setting is 0 s or 1 s.
In this menu item, the PIN is activated/deactivated permanently.
Entering a 4-digit PIN protects the sensor data against unauthorized
access and unintentional modifications. If the PIN is activated perma-
VEGAPULS 62 • Profibus PA