Setting Up The Polling Time Interval; During Gm Operation - Standard Horizon HX890 Owner's Manual

6. Press the [CH▼]/[CH▲] key to select a list
number, then press the [SELECT] soft key.
7. Press the [CH▼]/[CH▲] key to select a
member from the Individual directory, then
press the [SELECT] soft key.
8. Repeat steps 6 and 7 to add members to
the group.
9. Press the [BACK] soft key to return to the
"NAME" and "GM ID" screen.
10. To store the data, select "SAVE" with the
[CH▼]/[CH▲] key, then press the [SELECT]
soft key.
11. To enter other group directories, repeat
steps 5 through 10.
12. Press the [CLR] key to return to radio opera-
tion.

12.1.2 Setting Up the Polling Time Interval

Press and hold

key
1. Press the [CH▼]/[CH▲] key to select the desired interval
time, then press the [ENTER] soft key.
2. Press the [CLR] key to return to radio operation.
12.1.3 Enabling/Disabling Transmission during GM Operation
Press and hold

key
1. Press the [CH▼]/[CH▲] key to select the desired transmis-
sion type, then press the [ENTER] soft key.
OFF: Disables the transmission during GM operation.
ON GM: Enables the transmission during the GM target
display.
ON ALL: Enables the transmission during the GM opera-
tion.
2. Press the [CLR] key to return to radio operation.
72
GM SETUP

( / key)
GM SETUP

( / key)
GM GROUP DIR.
1:
2:
3:
4:
5:
6:
7:
BACK
GM GROUP DIR.
1:
2:
3:KAREN
4:
5:
6:
7:
BACK
SELECT
INTERVAL

( key) (
SELECT
GM TX

( key) (
STANDARD
INDIVIDUAL DIR.
YAESU
KAREN
DELETE SELECT BOB
366901254
Horizon-1
Standard
STANDARD Horizon-2
USCG
BACK DELETE
GM GROUP DIR.
NAME:
STANDARD---------
DELETE SELECT
GM ID:
087654321
MEMBERS
SAVE
BACK

/ key) (
GM SETUP
INTERVAL
1min
3min
5min
10min
15min
BACK

/ key) (
GM SETUP
GM TX
ON GM
ON ALL
BACK
SELECT
SELECT
SELECT
key)
ENTER
SELECT
key)
OFF
ENTER