Standard Horizon HX890 Owner's Manual page 29

8.9.1 Selecting the Scan Type
Press and hold

key
1. Press the [CH▼]/[CH▲] key to select "PRIORITY" or
"MEMORY".
2. Press the [ENTER] soft key to store the selected setting.
3. Press the [CLR] key to return to radio operation.
CH88
CH1078
CH68
CH1061
M S
eMory
8.9.2 Programming Scan Memory
Press and hold

key
1. Press the [CH▼]/[CH▲] key to select a desired channel
to be scanned, then press the [MEM] soft keys. The "ON"
icon will appear at the right side of the selected channel.
2. Repeat step 1 for all the desired channels to be scanned.
3. To REMOVE a channel from the list, select the channel then
press the [MEM] soft key. The "ON" icon of the selected
channel will disappear.
4. When you have completed your selections, press the [CLR]
key to return to radio operation.
To check channels to be scanned, press the [CH▼]/[CH▲]
key repeatedly. The "MEM" icon will appear when the memory
channel is displayed.
Note: When "SCAN MEMORY" is assigned to the soft key, the
memory function switches between ON and OFF, each time
the [MEM] soft key is pressed.
CH SETUP
( / key)
CH1001
CH09
CH12
CH15
CH1018
CH1022
( M-Scan )
can
CH SETUP
( / key)
SELECT
 
( key)
CH88
CH1078
CH68
CH1061
P
SELECT
 
( key)
SCAN TYPE

( / key)
BACK
CH1001
Priority Channel
CH1022
( P-Scan )
S
riority can
SCAN MEMORY

( / key)
BACK
RX
LAT
LON
TIME
SELECT
( key)
CH SETUP
SCAN TYPE
PRIORITY
MEMORY
ENTER
CH09
CH12
CH15
CH1018
SELECT
( key)
CH SETUP
SCAN MEMORY
16
ON
CH:
17
ON
CH:
1018
CH:
1019
CH:
20
ON
CH:
MEM
USA HI
16
P
MEM
DISTRESS
33 ° 37.1200
N
118 ° 09.5822
W
LOC 09:56:56
AM
27