Audio Filter Operation - Standard Horizon HX890 Owner's Manual
Class-h dsc gps transceiver
Hide thumbs
Also See for HX890:
- Firmware update instruction manual (5 pages) ,
- Owner's manual (107 pages)
Table of Contents
Advertisement
14.12.2 Setting the VOX Level
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select the desired activation
level.
The level can be set from "0" to "4" ("2" is default).
2. Press the [ENTER] soft key to store the new setting.
3. Press the [CLR] key to return to radio operation.
During setup the VOX level can be seen directly by speaking into the
microphone while the VOX operation is enabled.
14.12.3 Setting the VOX Delay Time
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select the desired VOX
delay time from "0.5sec", "1.0sec", "1.5sec", "2.0sec" or
"3.0sec" ("1.5sec" is default). .
2. Press the [ENTER] soft key to store the new setting.
3. Press the [CLR] key to return to radio operation.
14.13 AUDIO FILTER OPERATION
This menu item allows selecting the internal audio filter for most comfortable
listening.
Press and hold
key
1. Press the [CH▼]/[CH▲] key to select the desired filter
operation.
2. Press the [ENTER] soft key to store the new setting.
3. Press the [CLR] key to return to radio operation.
84
CH SETUP
(
/
key)
CH SETUP
(
/
key)
CH SETUP
(
/
key)
SELECT
VOX LEVEL
(
key)
(
NOTE
SELECT
VOX DELAY
(
key)
(
SELECT
AF PITCH
(
(
key)
SELECT
/
key)
(
CH SETUP
VOX LEVEL
2
BACK
SELECT
/
key)
(
CH SETUP
VOX DELAY
0.5sec
1.0sec
1.5sec
2.0sec
3.0sec
BACK
SELECT
/
key)
(
CH SETUP
AF PITCH
NORMAL
HIGH-LOW CUT
HIGH-LOW BOOST
LOW BOOST
HIGH BOOST
BACK
key)
ENTER
key)
ENTER
key)
ENTER
Advertisement
Table of Contents
