Standard Horizon HX890 Owner's Manual page 45

Individual Call by Manually Entering a MMSI
An MMSI number to be contacted may be manually entered without storing it
in the individual directory.
Press

key
(
1. Press the [CH▼]/[CH▲] key to select "NEW
ID", then press the [SELECT] soft key.
2. Press the [CH▼]/[CH▲]/[◄]/[►] key
to select the first number of the MMSI
which you want to contact, then press
the [SELECT] soft key to step to the next
number.
3. Repeat step 2 to set the MMSI number (nine
digits).
If a mistake was made entering in the
MMSI number, press the [CH▼]/[CH▲]/
[◄]/[►] key to select "←" or "→", press the
[SELECT] soft key until the wrong character
is selected, then perform step 2.
4. W hen finished entering the MMSI number,
press the [FINISH] soft key.
5. Press the [CH▼]/[CH▲] key to select the
operating channel you want to communi-
cate on, then press the [SELECT] soft key.
To select an operating channel from all the
voice channels, press the [MANUAL] soft
key.
6. Press the [YES] soft key to transmit the individual DSC signal.
7. When an individual call acknowledgment is received, the established
channel is automatically changed to the channel which is selected in step
5 above, and a ringing tone sounds.
8. Press the [QUIT] soft key to listen to the channel and make sure it is not
busy, then press the PTT button and talk into the microphone to the other
vessel.
/ / / key)
SELECT
INDIVIDUAL
 
( key)
INDIVIDUAL CALL
HISTORY
MEMORY
NEW ID
BACK
INDIVIDUAL CALL
BACK
INDIVIDUAL CALL

( / key)
INDIVIDUAL CALL
SELECT
1 2
BACK
INTERSHIP CH
06
CH:
08
CH:
09
CH:
INDIVIDUAL CALL
10
CH:
13
CH:
CATEG:
MANUAL SELECT
Do you want to
987654321
transmit a Call?
YES
ROUTINE
CATEG:
67
CH:
INDIVIDUAL CALL
Transmitting
CATEG:
SINCE:
Waiting for ACK
RESEND
SELECT
( key)
MMSI
98765432 -
3 4 5 6 7 8 9 0
Delete
FINISH SELECT
987654321
ROUTINE
67
CH:
NO
987654321
ROUTINE
67
CH:
00:05
QUIT
43