Avalue Technology ESM-KBLU User Manual page 69

IUER Button Enable
DP-to-VGA or HDMI-C
Selection
3.6.3.1.1.1 LCD Control
Item
Primary IGFX Boot Display
Active LFP
CH7511 EDID Panel Option
Disabled[Default]
Enabled
DP-to-VGA[Default]
HDMI-C
Option
VBIOS Default[Default],
EFP
LFP
EFP3
EFP2
EFP4
No eDP
eDP Port-A[Default],
1024x768 24/1[Default]
800x600 18/1
1024x768 18/1
1366x768 18/1
1024x600 18/1
1280x800 18/1
1920x1200 24/2
ESM-KBLU User's Manual
Enable/Disable IUER Button Functionality.
Selection of Port-C output.
Description
Select the Video Device which will be
activated during POST. This has no effect if
external graphics present. Secondary boot
display selection will appear based on your
selection. VGA modes will be supported
only on primary display.
Select the Active LFP Configuration. No
LVDS:VBIOS does not enable LVDS.
Int-LVDS:VBIOS enable LVDS driver by
Integrated encoder. SDVO LVDS:VBIOS
enables LVDS driver by SDVO encoder.
eDP Port-A:LFP Driven by Int-DisplayPort
encoder from Port-A. eDP Port-D:LFP
Driven by Int-DisplayPort encoder from
Port-D(through PCH).
Port1-EDP to LVDS (Chrotel 7511) Panel
EDID Option.
ESM-KBLU User's Manual 69