Table of Contents
Advertisement
Item
Out-of-Band Mgmt Port
Terminal Type
Bits per second
Flow Control
3.6.2.12 Intel TXT Configuration
Option
COM0[Default]
VT100
VT100+
VT-UTF8[Default]
ANSI
9600
19200
57600
115200[Default]
None[Default]
Hardware RTS/CTS
Software Xon/Xoff
ESM-KBLU User's Manual
Description
Microsoft Windows Emergency Management
Services (EMS) allows for remote management
of a Windows Server OS through a serial port.
VT-UTF8 is the preferred terminal type for
out-of-band management. The next best choce is
VT100+ and then VT100. See above, in Console
Redirection Settings page, for more Help with
Terminal Type/Emulation.
Selects serial port transmission speed. The
speed must be matched on the other side. Long
or noisy lines may require lower speeds.
Flow control can prevent data loss from buffer
overflow. When sending data, if the receiving
buffers are full, a 'stop' signal can be sent to stop
the data flow. Once the buffers are empty, a
'start' signal can be sent to re-start the flow.
Hardware flow control uses two wires to send
start/stop signals.
ESM-KBLU User's Manual 61
Advertisement
Table of Contents
