3.6.2.3.1.1 OEM Flags Settings
Item
MEBx hotkey Pressed
MEBx Selection Screen
Hide Unconfigure ME
Confirmation
MEBx OED Debug Menu Enable
Unconfigure ME
Disabled[Default],
Enabled
Disabled[Default],
Enabled
Disabled[Default],
Enabled
Disabled[Default],
Enabled
Disabled[Default],
Enabled
ESM-KBLU User's Manual
Description
OEMFLag Bit 1: Enable automatic MEBx hotkey
press.
OEMFLag Bit 2: Enable MEBx selection screen
with 2 options: Press 1 to enter ME Configuration
Screens Press 2 to initiate a remote connection
Note: Network Access must be activated from
MEBx Setup for this screen to be displayed.
OEMFlag Bit 6: Hide Unconfigure ME
confirmation prompt when attempting ME
unconfiguration.
OEMFlag Bit 14: Enable OEM debug menu in
MEBx.
OEMFlag Bit 15: Unconfigure ME with resetting
MEBx password to default.
ESM-KBLU User's Manual 45