Advertisement
Installation Instructions for Lenel Access Controllers to TMV2 (Door Backplane):
1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 6, pg. 9).
2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 6a, pg. 9).
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
Lenel
LNL-3300
LNL-8000
LNL-2220
LNL-4420
LNL-1100
LNL-1200
LNL-1320
Fig. 6
- 9 -
Pem
Current Draw
Mounting
12-24VDC 300mA max.
A
12VDC 250mA max.
12-24VDC 500mA max.
12-24VDC 500mA max.
B
12-24VDC 350mA max. (12VDC @ 300mA nom., 24VDC @ 220mA nom.)
12-24VDC 1100mA max. (12VDC @ 850mA nom., 24VDC @ 450mA nom.)
12-24VDC 550mA max. (12VDC @ 450mA nom., 24VDC @ 270mA nom.)
A
B
A
B
A
B
A
B
A
B
A
B
Fig. 6a
Pem
Snap on or
Metal
Standoff
Backplane
Sub-Assembly
Trove / Lenel
Advertisement
