Advertisement
Installation Instructions for Lenel Access Controllers to TM2:
1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 5, pg. 8).
2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 5a, pg. 8).
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
Lenel
LNL-2210
LNL-1300e
LNL-1300
Fig. 5
Trove / Lenel
Pem
Current Draw
Mounting
12VDC 900mA max.
A
12VDC 1100mA max.
B
12-24VDC 150mA max. (12VDC @ 110mA nom., 24VDC @ 60mA nom.)
A
A
A
A
A
B
B
Fig. 5a
Pem
Snap on or
Metal
Standoff
Backplane
Sub-Assembly
- 8 -
Advertisement
