Advertisement
Installation Instructions for Lenel Access Controllers to TM2:
1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 4, pg. 7).
2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 4a, pg. 7).
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
Pem
Lenel
Current Draw
Mounting
LNL-3300
12-24VDC 300mA max.
A
LNL-8000
12VDC 250mA max.
LNL-2220
12-24VDC 500mA max.
LNL-4420
12-24VDC 500mA max.
LNL-1100
12-24VDC 350mA max. (12VDC @ 300mA nom., 24VDC @ 220mA nom.)
B
LNL-1200
12-24VDC 1100mA max. (12VDC @ 850mA nom., 24VDC @ 450mA nom.)
LNL-1320
12-24VDC 550mA max. (12VDC @ 450mA nom., 24VDC @ 270mA nom.)
Fig. 4
- 7 -
A
B
A
B
A
B
Refer to
LNL-3300 Quick Reference (QR50L-1001E - revision 2.023)
LNL-8000 Quick Reference (QR50L-1000E - revision 1.020)
LNL-2220 Quick Reference (QR50L-1002E - revision 2.022)
LNL-4420 Quick Reference
(QR50L-1024E-LNL-4420 - revision 1.001)
LNL-1100 Series 2 Quick Reference
(QR50L-1010E - revision 1.019)
LNL-1200 Series 2 Quick Reference
(QR50L-1009E - revision 1.019)
LNL-1320 Series 2 Quick Reference
(QR50L-1007E - revision 1.020)
A
B
A
B
A
B
Fig. 4a
Pem
Snap on or
Metal
Standoff
Backplane
Sub-Assembly
Trove / Lenel
Advertisement
