Fluke CertiFiber Pro User Manual page 95

5 Insert the probe into the connector.
6 To adjust the focus, turn the knob on the probe clockwise or
counterclockwise.
The button on the DI-1000 probe has no function
when you use the probe with the Versiv unit.
7 To save the image, tap SAVE.
8 On the SAVE RESULT screen, select End 1 or End 2, make sure
the Cable ID and End name are correct, then tap SAVE.
Saved FiberInspector results show these icons for End 1 and End
2:
The Auto Save function does not operate with the
FiberInspector test.
Continuous use of the video probe decreases the
battery life. To increase the battery life, connect
the ac adapter when you use the probe for more
than a few minutes.
Chapter 4: The FiberInspector Test
How to Do the FiberInspector Test
Note
Notes
85