Options And Accessories - Fluke CertiFiber Pro User Manual

CertiFiber Pro Fiber Optical Loss Test Set
Users Manual
You can also use LinkWare software to upload the system log
from the tester. This file contains information that can possibly
help Fluke Networks find a solution to an unusual problem.
To see the serial numbers of the main and remote units and
modules if the tester is not operating correctly, remove the
module and look at the stickers under and on the module.
Table 3. Possible Solutions for Unusual Behavior
The touchscreen or the keys do not respond.
Press and hold

problem continues, install the latest version of software in the tester.
The tester will not turn on even though the battery is charged.
The fuse in the battery is possibly open. Connect the AC adapter. The tester
can operate on AC power if the battery does not operate.
Test results appear to be incorrect.
The tester possibly has incorrect settings. Make sure you selected the correct
cable type and test limit.

Options and Accessories

For a complete list of options and accessories go to the Fluke
Networks website at www.flukenetworks.com.
To order options and accessories, contact an authorized Fluke
Networks distributor.
130
until the tester turns off. Then turn on the tester. If the