Fluke CertiFiber Pro User Manual page 136

CertiFiber Pro Fiber Optical Loss Test Set
Users Manual
To use an updated main unit to update a remote or another main
unit
1 Turn on both testers and connect the AC adapters to both
testers.
2 Use the USB cable provided to connect the updated main unit
to the remote or to another main. See Figure 39.
3 Follow the instructions shown on the display of the updated
main unit.
If a remote has newer software than the main
unit, the main unit can install the older software
in the remote so that you can use the two units
together. The remote cannot install the newer
software in the main unit.
To update the software in a module
To update the software in a module, attach it to a main or remote
Versiv unit that has the latest software. The tester automatically
installs the software in the module.
126
Note