Fluke CertiFiber Pro User Manual page 113

The cable IDs that have FAIL results and must be tested again.

Because some IDs can have one or more tests that failed, the
number at the top of this screen (
number of retests needed.
 The cable IDs that have an overall PASS or
some IDs can have one or more tests that passed or have an
status, the number at the top of this screen (
than the number of passes.
IDs that start with "TRC" are from verification tests on test
reference cords. These IDs show the date and time of the test.
Tap VIEW ALL to see a summary of the results in all the projects

in the tester.
TRANSFER lets you export or import results to or from a flash

drive and delete results on the flash drive.
 MANAGE lets you move results to a different project, rename
results, or delete results that are in the tester.
The icons show the types of fiber test results that the result

contains:
Loss/length results from a CertiFiber Pro OLTS module.
CertiFiber Pro OLTS module.
FiberInspector results from End 2 and End 1.
A fiber result can also contain OTDR, FaultMap
Trace results from OptiFiber Pro modules.
The scroll bar shows when the list of results is long. To use the

scroll bar, tap on the bar or slide your fingertip on the bar. For
example, to see the 12th result in the list, tap on "12" in the
scroll bar. When you slide your fingertip on the bar, the number
of the result you can see is next to your fingertip.
Power meter results from End 2 and End 1 from a
Chapter 7: Test Results
View Saved Results
) can be more than the

result. Because
 ) can be more
™ , and Real Time
103