Fluke CertiFiber Pro User Manual page 124

CertiFiber Pro Fiber Optical Loss Test Set
Users Manual
Test Setup: The tests that are available in the project.

To add a test to the project, tap NEW TEST.
Cable ID Sets: The sets of IDs the tester can use for the names of

test results. Each ID set is for either copper or fiber cable.
To add a set of IDs to the project, tap NEW ID SET. See Figure 37.
 To use a different project, tap CHANGE PROJECT, then tap a
project.
To make a new project, tap CHANGE PROJECT, then tap NEW
PROJECT.
TRANSFER lets you export or import projects to or from a flash

drive and delete projects on the flash drive. The project data
includes all project settings and test results.
MANAGE lets you rename, copy, or delete a project that is in the

tester.
To delete the test setup or ID set, tap

or ID set so you can edit it to make a new one, tap
If you delete an imported ID set from a project,
the ID set is still available in the tester. To delete
imported ID sets from the tester, use LinkWare
software.
A project must have at least one Test Setup and
one Cable ID set. If you delete them all, the tester
makes a default Test Setup and Cable ID set.
114
. To copy the test setup
Note
Note
.