Fluke CertiFiber Pro User Manual page 63

Jumper Reference

each fiber path when you set the reference. The dotted lines in
the diagram on the screen show you which parts of the link are
included in the test results. See Reference Method on page 50.
 The dotted lines show you which parts of the link are included in
the test results.
Connector icons show the connections between the ends of the

link. If you enter 7 or more for the Total Connections setting, a
number inside of a connector icon shows the number of
connectors between the ends of the link. For example, if the
Total Connections setting is 7, a connector icon shows the
number 5 (
The round icon shows the number of splices in each path of the

link.
To see help for the screen, tap

To save your settings, tap DONE.

Chapter 3: How to Certify Fiber Cabling
Enter the number of jumpers you will use in
:
)
Settings for Fiber Tests
.
53