Fluke CertiFiber Pro User Manual page 134

CertiFiber Pro Fiber Optical Loss Test Set
Users Manual
The software update procedure does not delete
the test records, project settings, or user
preferences in the tester, but can possibly change
the factory-installed cable types or test limits.
1 Install the latest version of LinkWare software on your PC.
LinkWare is available on the Fluke Networks website.
2 Download the Versiv update file from the Fluke Networks
website, or contact Fluke Networks to get the update by
other methods. Save the file to your hard drive.
3 Connect the AC adapter to the tester and connect the
Micro-AB USB port on the tester to a type A USB port on the
PC. See Figure 38.
4 On the LinkWare menu, select Utilities > CertiFiber Pro >
Software Update, find and select the update file, then click
Open. LinkWare saves the update file on the tester, then the
tester installs the file.
5 The tester reboots when the update is completed. To make sure
the update was installed correctly, tap the TOOLS icon on the
home screen, tap Version Information, then make sure the
Versiv main unit and the module show the correct version.
6 Do steps 3 through 5 again for the remote. On a remote
tester, the LEDs show the progress of the installation.
124
Note