Table of Contents
Advertisement
5. Call info.
5.1 Call list
This menu provides you with the list of outgoing and incoming calls, as well as attempts at auto
redialing and call details. The calls (made, missed and received) are displayed in chronological
order with the most recent on top of the list. When the Call list is empty the screen displays List
empty. The most recent number is displayed on the top of the screen. The different call type will
have different icon be shown, there are three icon of the call type as follows:
/// Indicates the dialed calls
/// Indicates the missed calls
/// Indicates the answer calls
5.1.1 Call list
Select a call list press OK to consult the date, time, number, and call status of any selected call and
to know if it was sent or received. Press [OK] key to following option:
Call: Dial the selected associated number of the call list.
IP Call: Allows you to set prefix IP number before made a call.
Headsfree: Use the Headsfree feature to call the selected number of call list
IP Headsfree: Enter the IP prefix before dial the IP call number.
Send a SMS: Allows you to send a SMS to the selected number of the call list.
Send a MMS: You can send a MMS to the selected number of call lists
Store: store the associated number.
Reset
Clear the all Name lists and restart the list.
5.2 Counters
The GSM Call Counters do not include WAP connections. Most options mentioned below are
subscription-dependent.
You can access follows option use this menu:
Total duration
Select this option to show the time duration of Outgoing or Incoming calls.
Last call information
This menu allows you to display the name, number, time and cost of your last call.
Reset
Select this option to reset the time duration of outgoing or incoming calls.
5.3 Total cost
Allows you to display the accumulated cost and to set the counter to zero. It may be protected by
PIN or PIN2
5.3.1 show
Shows how much has been spent after having established the charge rate.
5.3.2 Change rate
Allows you to set or change the rate per unit. First enter the currency used (three characters
maximum) then enter the cost per unit.
5.3.3 Reset
Allows you to reset the current Total cost to 0; requires your PIN2 code.
5.3.4 Show balance
Allows you to check the remaining credit (compared with previously set limit).
Advertisement
Table of Contents
