Activate The Silence Mode; Activate The Vibra Alert; Read Your Mobile Phone Number; Adjust The Earpiece Volume - Haier T3000 Manual

Table of Contents

Advertisement

Press [ok] key select Settings > Sounds > Ringers, move up / down key to select a ringer in the list,
then press OK to confirm your choice.
Note: Press and hold Contacts/ring key (that is in the upper left corner of the keypad) to enter
ringer list.

2.6 Activate the silence mode

If you don't want your phone to ring when you receive a call, you can deactivate the ringer as
follows: Select Settings > Sounds > Silent and select 'on' confirm. You can press left down side
key to close the volume during calling.
2.7 Activate the vibrate alert
If you want your phone to vibrate when you receive a call, you can activate the vibra alert as
follows: Select Settings > Sounds > Vibra alert and then move up or down to select On or Off and
press OK to confirm.
Activating the vibra doesn't mute the ringer. If you want to mute it and keep the vibra function on,
activate the Silent mode as described above. The vibra alert is automatically deactivated when you
plug the charger.

2.8 Read your mobile phone number

To read your own mobile phone number, press down key when in idle mode and select 'Own
numbers', then press OK to select Show and press OK again. Your phone number is displayed if
present on your SIM card. If not, select New, then follow the instructions. If your own number has
been stored in the Phonebook, you can read it during a call.

2.9 Adjust the earpiece volume

During a call, press up /down left side key to increase /decrease the volume.

2.10 Mute the microphone

You can mute the microphone so that your caller cannot hear you. During a call, press [OK],
select Mute and confirm by pressing [OK].

2.11 Un-mute the microphone

To un-mute the microphone during a call, press [OK], select 'Un-mute' and confirm by pressing
[OK], The microphone is un-muted.

2.12 Clear the call list

To clear your call list, press [OK], and select Call Info > Call list > Reset. Press [OK], twice to
reset the call list.

2.13 Clear the SMS list

To clear the whole messages list at once, press [OK], and select Messages > SMS > Read SMS >
Delete all SMS. Press [OK], twice to reset the SMS list.

2.14 Clear the contacts

To clear the content of your contacts at once, press OK and select Contacts > Delete all. Press OK
twice to reset the contacts content.

Advertisement

Table of Contents
loading

Table of Contents