Haier T3000 Manual page 43

ⅤText or number entry
Text can be entered in editing screens in two different ways by using T9 predictive Text Input, or
basic text input. Two other modes for numbers and punctuation marks, are also available. Icons
appearing on the screen show the active text mode.
1.1 T9 text input
T9 predictive Text Input is an intelligent editing mode for messages, including a comprehensive
dictionary. It allows you to quickly enter text. Press only once on the key corresponding to each
letter needed to spell a word; keystrokes input are analyzed in the edit screen. If several words are
available according to the keys used, the work you entered is highlighted: press navigation keys to
browse the list and to choose from those proposed by the T9 built-in dictionary. (See example
below)
Example: how to enter the word "home":
1 Press 4,6, 6,3.the screen displays the first word of a list: Good.
2 Press right or left to scroll and select Home.
3 Press OK key to confirm 'Home'.
1.2 Basic Text Input
If you wish to access the basic text input, select "Abc" basic text input using * key. This method
requires multiple key presses to reach the desired character: the letter "h" is the second letter on
the 4 key, so you must press it twice to enter "h". Using this mode requires you press a key as
many time as is equal to the order of the letter.
Note: if you keep pressing the key, numbers located on that key will be displayed and you can
select them directly.