Haier T3000 Manual page 27

If you select the contacts «On SIM card», an edit window will allow you to enter e-mail address.
Validate list
When the required recipients name be added in the list, then select Validate list and press OK to
enter the subject of your e-mail. In the next window enter the text of your e-mail. Press OK to
confirm, as following option to select:
Send now: send you e-mail to the selected addressee.
Modify mail: Remodify the e-mail
Add sound: To add a sound to your e-mail.
Add graphic: to add a graphic to your e-mail.
Note: You can only attach one JPEG file at a time. If you exit the Send e-mail menu before
sending your e-mail, its content (including attachment) is deleted without being stored.
3.3.3 Settings
Press OK to select Messages > E-mail > E-mail 1 and press OK. And then select settings and press
OK access the following option:
Account name
This menu allows you to rename the available e-mail 1 and e-mail 2 accounts. An e-mail account
might be pre-configured with the name of your operator. In this case, its name cannot be changed.
E-mail server
The menus described in this section feature setting needed to connect to the e-mail server of your
Internet Service Provider (ISP) via your mobile phone.
In some cases, Login, Password and E-mail address are up to you when you subscribe to your
account. Enter them as defined.
POP3 address: is used to receive e-mail, and the SMTP address is used to send e-mail.
WARNING ! For an e-mail connection via GPRS, if your phone operator is not your e-mail
provider, contact your operator to get the correct address of the SMTP server and enter it in this
field.
Advanced
The menus described in this section feature advanced settings that may have been pre-configured,
so you shouldn't have to change any of them. If the fields of these menus are empty, or if you
encounter connection problems, contact your ISP.
SMPT authenticate: When leave factory, this menu should be set to Off. Your e-mails will NOT
be sent if set to On. Allows you to activate/deactivate the authentication process with the SMTP
server. Contact your provider for complete information.
Network access
This menu allows you to select the type of network used when launching a connection.
GPRS settings
This menu allows you to enter or change the GPRS settings communicated to you by your
operator, which are: APN, Login and Password. All settings must be entered as given to you by
your operator.
Error messages during connections are mainly due to incorrect parameters: you should contact
your operator before first use, in order to have the appropriate GPRS parameters.
GSM settings
This menu allows you to enter or change the GSM settings communicated to you by your operator,
which are: Phone number, Auto disconnection, Login and Password. Enter them as defined.