Haier T3000 Manual page 41

9.1.2 Haier zone
This menu allows you to log on http://wap.haier.com directly.
9.1.3 Bookmarks
This menu allows you to store your favorite WAP site addresses, rename them if desired and
access them quickly from the list. Select one address and press OK key, then you can connect to
it.
There are two ways to add bookmarks: one way is select Bookmark 〉Add new; The other way is
you can add new bookmarks directly when you browsing.
Add new
Select WAP〉 Bookmarks〉Add bookmark and press OK key, then start entering the new name , an
edit screen automatically appears, after that press OK key to save the name and entered. Press OK
to move to the address field and proceed the same way to enter the WAP addresses.
When you browsing: press the green key to access the Options, then select Bookmarks. In this
case, the Name and URL fields will be automatically filled in with the information contained in
the page you are browsing.
Manage bookmarks
This menu allows you to Delete the stored bookmarks, or to Edit selected bookmark.
9.1.4 Go to URL
This menu allows you to enter a WAP site address, to which you can connect directly when
selecting it and pressing OK key. This is a quick way to access WAP addresses without saving
them as bookmarks.
All the addresses you enter in this menu and connect to at least once, will appear in a list: select
one of the items and press OK key to reconnect to the corresponding page, without having to enter
the complete address again.
9.1.5 Settings
Options for Homepage are as follows:
Edit Homepage
Press OK key and start entering the new name. An edit screen automatically appears. Press OK
key to save the name you entered. Back to the Edit Homepage menu, proceed the same way to
change the address.
Select profile
This menu allows you to select one of the available profiles, and to them define the connection
settings for each of them. Press left or right to select it and press OK key to confirm.
Note: all connection settings described below will apply to the selected profile.
Connection
Select connection
Allows you to select one of the data profiles you have defined in Settings 〉Access settings.
Bearer
Allows you to select the type of network used by the selected profile when launching a
connections.
Proxy address
Allows you to specify a proxy gateway address to be used when launching a WAP connection
using the selected profile.
Proxy port