Factory Settings - Haier T3000 Manual

2.9.2 GPRS attach
This menu allows you to define the attach mode of your mobile phone to the GPRS service:
Always on
Your phone will always register to the GPRS service. This option allows faster GPRS connection.
However it will increase energy consumption.
For data calls
Your phone will automatically register to the GPRS service only when required. This option
reduces energy consumption, however it will increase the connection delay.
All options described below are operator and/or subscription dependent. With some operators, you
may receive a SMS that contains access parameters that will be stored automatically. Please
contact your network operator for detailed information on this subject. Some pre-configured
profiles might be locked, preventing re-programming and renaming.
Allows you to enter or change the GSM settings and gives you access to the following items:
Change name
Allows you to enter or change the name of the selected profile.
Your phone will automatically register to the GPRS service only when required. This option
reduces energy consumption, however it will increase the connection delay.
2.9.3 Register again
Provides you with a list of the networks available in the area when the Manual mode is selected.
Select the network you want to register with and press [OK] to confirm.
2.9.4 Access settings
This menu allows you to create several data profiles: when using WAP or when sending a
multimedia message (MMS), the selected profile will be used to connect to the GSM or GPRS
network.
Note: All options described below are operator and/or subscription dependent. With some
operators, you may receive a SMS that contains access parameters that will be stored
automatically. Please contact your network operator for detailed information on this subject.
Show: Allows you to visualize all parameters of the selected profile.
GSM settings: Allows you to enter or change the GSM settings.
Login
Password
Phone number: Phone Number supplied by operator allows you to enter the phone number
needed to establish a connection ISDN No. or Analogic No).
Inactivity time: allow you to enter inactivity time period after which the phone automatically
disconnects (enter a value (in seconds) of over 30 s).
GPRS settings:
This allows you to change the GPRS settings:
Login,
Password
APN: Allows you to enter the character string for use to connect to establish the connection.
Inactivity time
Inactivity time: allow you to enter inactivity time period after which the phone automatically
disconnects (enter a value (in seconds) of over 30 s).

2.10 Factory settings