1.2 Gpio Setting; 1.3 Mcu Gpio Setting - Nexcom VTC 1010 User Manual

Appendix A: Software Demo Utility for I/O Ports of Function Control

1.2 GPIO Setting

1.2.1 GPIO Select
Defines GPIO port as GPO or GPI.
1.2.2 GPO Set
Selects the GPO ports and makes the output low or high.
1.2.3 GPI Read
Reads the status of GPI.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

1.3 MCU GPIO Setting

1.3.1 MCU GPO Set
Selects MCU GPO ports and makes the output low or high.
1.3.2 MCU GPI Status
Shows the status of the MCU GPI.
48
VTC 1010 User Manual