Installing A Wireless Lan Module - Nexcom VTC 1010 User Manual

Chapter 5: System Setup

Installing a Wireless LAN Module

1. The Mini PCI Express slot (CN6) shown below is used to install a wireless
LAN module.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
2. Insert the module into the Mini PCI Express slot at a 45 degrees angle
until the gold-plated connector on the edge of the module completely
disappears inside the slot. Then fasten screws into the mounting holes
to secure the module, and attach one end of the RF cable onto the
module.
42
VTC 1010 User Manual